wired direct-clients enable
This command is disabled by default.
Privileged EXEC Mode
The wired direct-clients
enable command is used to display only the MAC addresses that are
directly attached to the switch and ignores all the MAC addresses learned on
neighboring switches through LLDP.
The no form of the command
(default system setting), displays the MAC addresses that are directly attached to
the switch and MAC addresses learned on the non-RUCKUS devices connected to the
switch on which this command is executed.
The output will be displayed on the Wired Client page in SmartZone and in the snmpwalk/snmpbulkwalk on the wired-mac table ‘1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1’. Refer to the wired client visibility table in the RUCKUS FastIron MIB Reference Guide.
| Release version | Command history |
|---|---|
| 08.0.95q, 10.0.10f | This command was introduced. |