add-vlan
Adds individual VLANs or a range of VLANs.
Command Default
VLANs are added when creating a VLAN group.
Parameters
Modes
VLAN group configuration mode
Usage Guidelines
Use the
vlan-group command to add up to 256 VLANs. To add more than 256 VLANs, use the
add-vlan command.
Note: The device memory must be configured to contain at least the number of VLANs you specify
for the higher end of the range. For example, if you specify 2048 as the VLAN ID at
the high end of the range, you first must increase the memory allocation for VLANs
to 2048 or higher. Additionally, on Layer 3 switches, if you allocate additional memory
for VLANs, you also need to allocate the same amount of memory for virtual routing
interfaces before you configure the VLAN groups. This is true regardless of whether
you use the virtual routing interface groups. The memory allocation is required because
the VLAN groups and virtual routing interface groups have a one-to-one mapping.