dhcp snooping client-learning disable
Disables DHCP client learning on an individual port or range of ports.
Modes
Interface configuration mode
Usage Guidelines
Use the
no form of the command to re-enable DHCP client learning on a port once it has been
disabled.
Examples
The following example disables DHCP client learning on an individual port.
device(config)# interface ethernet 1/1/1 device(config-if-e10000-1/1/1)# dhcp snooping client-learning disable
The following example disables DHCP client learning on a range of ports.
device(config)# interface ethernet 1/1/1 to 1/1/5 device(config-mif-1/1/1-1/1/5)# dhcp snooping client-learning disable
History
| Release version | Command history |
|---|---|
| 08.0.40 | This command was modified to include enabling DHCP client learning on a range of ports. |