enable accounting (ACL)

Enables accounting for MAC ACLs at Layer 2, IPv4 ACLs, or IPv6 ACLs.
Syntax
enable accounting{name}
no enable accounting{name}
Command Default

By default, accounting is not enabled.

Parameters
name
Designates ACL name for which accounting is to be enabled or disabled.
Modes

access-list configuration sub-mode (IPv4, IPv6, MAC)

Usage Guidelines

The no form of the command disables accounting for the specified MAC ACL.

Examples

The following example creates an IPv6 access-list and enables accounting. 

device# configure terminal
device(config)# ipv6 access-list aclv6log
device(config-ipv6-access-list aclv6log)# enable accounting
device(config-ipv6-access-list aclv6log)# exit
device(config)#

The following example enables accounting for the MAC ACL mac123. 

device# configure terminal
device(config)# mac access-list mac123
device(config-macl-mac123)# enable accounting

The following example disables accounting for the MAC ACL mac123. 

device# configure terminal
device(config)# mac access-list mac123
device(config-macl-mac123)# no enable accounting
History
Release version Command history
08.0.95 This command was introduced.
Parent topic: Commands D through H