show manager service-validation
status
Displays the service validation test
result upload status sent from the ICX switch to RUCKUS One.
Modes
Privileged EXEC mode
Usage Guidelines
The show manager service-validation
status output details can be used to confirm whether service
validation test results were successfully transmitted or to troubleshoot streaming
failures.
Note: The timestamps displayed in the command output
are based on the time zone configured on the switch.
Examples
The following example displays the service validation test result upload status.
device# show manager service-validation status Recent service-validation data -: Success service-validation data - time : 2026-07-22 23:00:24 Success service-validation data - HTTP status : 202 Penultimate service-validation data -: Success service-validation data - time : 2026-07-22 22:15:18 Success service-validation data - HTTP status : 202 Recent successful service-validation data -: Success service-validation data - time : 2026-07-22 23:00:24 Success service-validation data - HTTP status : 202 Penultimate successful service-validation data -: Success service-validation data - time : 2026-07-22 22:15:18 Success service-validation data - HTTP status : 202 Recent failed service-validation data -: Failure service-validation data - Time : none Failure service-validation data - HTTP status : (none) Penultimate failed service-validation data -: Failure service-validation data - Time : none Failure service-validation data - HTTP status : (none)
History
| Release version | Command history |
|---|---|
| 10.0.10h07 | This command was introduced. |