relative-utilization
Configures uplink utilization lists that display the percentage of a given uplink
port's bandwidth that is used by a specific list of downlink ports.
Syntax
relative-utilization
number
uplink
ethernet
stack-id/slot/port
[
to
stack-id/slot/port
|[
ethernet
stack-id/slot/port
to
stack-id/slot/port
|
ethernet
stack-id/slot/port
] ...
]
downlink
ethernet
stack-id/slot/port
[
to
stack-id/slot/port
|
[
ethernet
stack-id/slot/port
tostack-id/slot/port
|
ethernet
stack-id/slot/port
] ...]no relative-utilization
number
uplink
ethernet
stack-id/slot/port
[
to
stack-id/slot/port
|
[
ethernet
stack-id/slot/port
to
stack-id/slot/port
|
ethernet
stack-id/slot/port
] ...
]
downlink
ethernet
stack-id/slot/port
[
to
stack-id/slot/port
|
[
ethernet
stack-id/slot/port
to
stack-id/slot/port
|
ethernet
stack-id/slot/port
] ...]Command Default
Relative utilization is not configured.
Parameters
Modes
Global configuration mode
Usage Guidelines
Each uplink utilization list consists of the following:
Each list displays the uplink port and the percentage of that port's bandwidth that was utilized by the downlink ports over the most recent 30-second interval.
You can configure up to four bandwidth utilization lists.
You can specify a list or range of ports as uplink or downlink ports.
The
no form of the command removes the uplink utilization list.
History
| Release version | Command history |
|---|---|
| 09.0.00 | This command was deprecated. |
| 09.0.10c | Support for this command was restored. |