show ip pim interface

Displays information for PIM interfaces.
Syntax
show ip pim interface [ ethernet unit/slot/port | lag number | loopback loopback-number | tunnel number | ve ve-number ]
Parameters
ethernet unit/slot/port
Specifies a physical interface. On standalone devices specify the interface ID in the format slot/port-id; on stacked devices you must also specify the stack ID, in the format stack-id/slot/port-id.
lag number
Specifies a LAG interface.
loopback loopback-number
Specifies a loopback interface.
tunnel number
Specifies a GRE tunnel.
ve ve-number
Specifies a virtual interface.
Modes

Privileged EXEC mode

The show ip pim interface command displays the following information:

Output Field

Description

Interface

Name of the interface.

Local Address

IP address of the interface.

Mode

PIM mode, dense or sparse..

St

PIM status for this interface, enabled or disabled.

Designated Router Address, Port

Address, port number of the designated router.

TTL Thr

Time to live threshold. Multicast packets with TTL less than this threshold value are not be forwarded on this interface.

Multicast Boundary

Multicast boundary ACL, if one exists.

VRF

Name of the VRF.

DR Prio

Designated router priority assigned to this interface.

Override Interval

Effective override interval in milliseconds.

Examples

The following example displays output from the show ip pim interface command, showing that ACL 10 is applied to interface 1/1/9 to control neighbor access. 

device> show ip pim interface
Flags    : SM  - Sparse Mode v2, DM - Dense Mode v2, P - Passive Mode

--------+---------------+-----+---+-------+---+-----+-------+-------+----+--------+
 
Int'face|Local          |Mode |St |Des Rtr|TTL|Mcast| Filter| VRF   |DR  |Override
        |Address        |     |   |AddPort|Thr|Bndry|  ACL  |       |Prio|Interval
--------+---------------+-----+---+-------+---+-----+-------+-------+----+--------+
e1/1/1   5.5.5.5         SM   Ena  Itself   1  None   None   default  1   3000ms
e1/1/9   15.1.1.5        SM   Ena  Itself   1  None   10     default  1   3000ms
e1/1/12  12.12.12.1      SM   Dis  Itself   1  None   None   default  1   3000ms
v20      21.21.21.22     SM   Ena  Itself   1  None   None   default  1   3000ms
v60      60.60.60.1      SM   Ena  Itself   1  None   None   default  1   3000ms
v310     110.110.110.2   SM   Dis  Itself   1  None   None   default  1   3000ms
v360     160.160.160.1   SM   Dis  Itself   1  None   None   default  1   3000ms
l2       4.4.4.4         SM   Ena  Itself   1  None   None   default  1   3000ms
l3       10.10.10.10     SM   Ena  Itself   1  None   None   default  1   3000ms
Total Number of Interfaces : 9
History
Release version Command history
08.0.20a This command was modified to display neighbor filter information.
Parent topic: Show Commands