manager active-list
manager active-list
{
ip-address
}
[
ip-address2
]
[
ip-address3
]no manager active-list
{
ip-address
}
[
ip-address2
]
[
ip-address3
]ICX-Management IP addresses are not configured on the ICX device, which means the ICX device attempts to initiate a connection with ICX-Management using the ICX-Management IP addresses provided through DHCP Option 43.
Global configuration mode
Use the no form of the manager active-list
command to remove the ICX-Management IP addresses. Use the no manager active-list
command with one IP address to remove only that address. To remove the entire
list,
use the no manager
active-list command followed by the entire list.
The ICX device attempts to connect to ICX-Management by sending a query to the ICX-Management IP addresses in the following order:
- switch registrar - IP address or fully qualified domain name (FQDN) received from the switch registrar (if enabled)
- active-list - ICX-Management IP addresses configured on
the ICX device using the
manager active-listcommand - DHCP - ICX-Management IP addresses received through DHCP Option 43
- backup-list - ICX-Management backup IP addresses
configured on the ICX device using the
manager backupcommand
Both "active" and "backup" ICX-Management IP addresses can be configured on the ICX device. Active IP addresses are given the highest priority; backup IP addresses are lower priority and are provided for redundancy.
If the ICX-Management active-list IP addresses are both configured on the ICX device and provided by DHCP Option 43, the configured list on the ICX device takes priority over DHCP Option 43. If none of the IP addresses in the configured list are reachable, the ICX device tries to reach the addresses received by DHCP Option 43.
The following example configures three active ICX-Management IP addresses. The ICX device attempts to create a connection beginning with the first IP address. If the attempt fails, the ICX device moves to the second and then the third IP address.
device# configure terminal device(config)# manager active-list 192.168.11.200 192.168.11.201 192.168.11.202
The following example removes a single IP address from the configured active-list.
device# configure terminal device(config)# no manager active-list 192.168.11.202