show ipv6 pim interface

Displays information for IPv6 PIM interfaces.
Syntax
show ipv6 pim interface [ ethernet unit/slot/port | lag number | loopback loopback-number | tunnel number | ve ve-number ]
Parameters
ethernet unit/slot/port
Specifies a physical interface. On standalone devices specify the interface ID in the format slot/port-id; on stacked devices you must also specify the stack ID, in the format stack-id/slot/port-id.
lag number
Specifies a LAG interface.
loopback loopback-number
Specifies a loopback interface.
tunnel number
Specifies a GRE tunnel.
ve ve-number
Specifies a virtual interface.
Modes

User EXEC mode

Examples

The following example displays output from the show ipv6 pim interface command, showing that ACL f10 is applied to interface 1/1/9 to control neighbor access. 

device> show ipv6 pim interface

Flags     : SM  - Sparse Mode v2

--------+---------------+-----+---+-------+---+-----+-------+-------+----+--------+
 
Int'face|Local          |Mode |St |Des Rtr|TTL|Mcast| Filter| VRF   |DR  |Override
        |Address        |     |   |Add Prt|Thr|Bndry|  ACL  |       |Prio|Interval
--------+---------------+-----+---+-------+---+-----+-------+-------+----+--------+
e1/1/1   3000::2         SM   Ena  Itself   1  None   None   default  1   3000ms
e1/1/9   201::1          SM   Ena  Itself   1  None   f10    default  1   3000ms
e1/1/12  1222::1         SM   Dis  Itself   1  None   None   default  1   3000ms
v20      2000::2         SM   Ena  Itself   1  None   None   default  1   3000ms
v60      6000::1         SM   Ena  Itself   1  None   None   default  1   3000ms
v310     1100::2         SM   Dis  Itself   1  None   None   default  1   3000ms
v360     1600::1         SM   Dis  Itself   1  None   None   default  1   3000ms
l2       4444::2         SM   Ena  Itself   1  None   None   default  1   3000ms
l3       7711::11        SM   Ena  Itself   1  None   None   default  1   3000ms
Total Number of Interfaces : 9
History
Release version Command history
08.0.20a This command was modified to display neighbor filter information.
Parent topic: Show Commands