copy flash scp
Syntax for copying an image between two DUTs:
copy flash scp
{
ipv4-address
|
ipv4-hostname
|
ipv6
{
ipv6-address-prefix/prefix-length
|
ipv6-hostname
}
}
{
flash:pri:remote-filename
|
flash:sec:remote-filename
{
primary
|
secondary
}
}Syntax for uploading from an ICX device to a Linux or a Windows server:
copy flash scp
{
ipv4-address
|
ipv4-hostname
|
ipv6
{
ipv6-address-prefix/prefix-length
|
ipv6-hostname
}
remote-filename
{
primary
|
secondary
}- ipv6-address-prefix/prefix-length
- Specifies the IPV6 address of the SCP server. You must specify this address in hexadecimal using 16-bit values between colons, as documented in RFC 2373.
- remote-filename
- Specifies the name of the file in the SCP server that is to be transferred, including the path to the remote image where applicable. Valid values range from 1 through 127 characters.
- flash:pri:filename
- Specifies the binary image in primary flash memory and the target filename when transferring files between DUTs.
- flash:sec:filename
- Specifies the binary image in secondary flash memory and the target filename when transferring files between DUTs.
- flash:primary
- Specifies the binary image in primary flash memory. Configure the flash:primary keyword when transferring files between DUTs. See the usage note regarding using this keyword when transferring files between DUTs.
Privileged EXEC mode
You are prompted for username and password when you configure this command.
The following example uploads the binary image in primary flash from an ICX DUT to primary flash on the target DUT with the IP address 10.198.137.141. The user is prompted for username and password.
device# copy flash scp 10.198.137.141 flash:primary primary Login:tsmith Password: Parameter Validation Successful ..........................................................File Upload Complete
The following example uploads a copy of an OS image file from the primary flash memory on an ICX device to the SCP server:
device# copy flash scp 10.20.1.1 SPS08040-scp.bin primary device# copy flash scp 10.20.1.1 SPS08040-scp.bin secondary
The following example uploads a copy of an OS image file from the primary flash memory on an ICX device to an SCP server with the IP address of 172.26.51.180 :
device# copy flash scp 172.26.51.180 imagefile primary
The following example uploads a copy of an OS image file from the primary flash memory on an ICX device to the SCP server:
device# copy flash scp 10.20.1.1 /tftp/ primary
The following example uploads a copy of an OS image file from the primary flash memory on an ICX device to the SCP server: The SCP server with the destination filename is explicitly specified.
device# copy flash scp 10.20.1.1 /tftp/SPS08040-scp.bin primary
The following example uploads a copy of an OS image file from the primary flash memory on an ICX device to the SCP server and displays the resulting format of the copy operation.
device# copy flash scp 10.177.16.145 /dataserve/switchdumps/Sh_bkup/10/ primary Result: [fvt@dataserve01-ai 10]$ ls -ltr rwxrwxrwt 1 fvt 200 94765343 Aug 25 2022 GZR10000_b375.bin