show ip reverse-path-check

Displays the global unicast Reverse Path Forwarding settings.
Syntax
show ip reverse-path-check
Modes

Privileged EXEC mode

Usage Guidelines

Use this command to display the global Unicast Reverse Path Forward settings, which includes the CLI configuration and current state of the Global Unicast Reverse Path Forward settings.

The show ip reverse-path-check command displays the following information.

Output field Description
CLI config The command line configured on the device after device bootup.
Current state The mode set during device bootup. This takes effect only after reload.
Examples

The following example shows the uRPF settings on an ICX device. 

device# show ip reverse-path-check
Global uRPF Settings:
CLI config : Enabled
Current State : Enabled
History
Release version Command history
08.0.30 This command was introduced.
08.0.40 Removed show output for the ICX 6610 device.
Parent topic: Show Commands