ipv6 mld max-response-time

Configures the maximum time a Multicast Listener Discovery (MLD) listener has to respond to queries for the default virtual routing and forwarding (VRF) instance or for a specified VRF.
Syntax
ipv6 mld max-response-time value
no ipv6 mld max-response-time value
Command Default

If this command is not configured, the maximum time the MLD has to respond to queries is 10 seconds.

Parameters
value
Specifies the maximum time, in seconds, a multicast listener has to respond to queries. Valid values range from 1 through 50. The default is 10 seconds.
Modes

Global configuration mode

VRF configuration mode

Usage Guidelines

The no form of the command sets the maximum time the MLD listener has to respond to queries to the default, 10 seconds..

Examples

The following example configures the maximum time the MLD has to respond to queries to 45 seconds. 

device# configure terminal
device(config)# ipv6 mld max-response-time 45

The following example configures the maximum time the MLD has to respond to queries to 20 seconds for the VRF named vpn1. 

device# configure terminal
device(config)# vrf vpn1
Device(config-vrf-vpn1)# address-family ipv6
device(config)# ipv6 mld max-response-time 20
History
Release version Command history
08.0.95 This command was updated to change the MLD maximum response time maximum value from 25 seconds to 50 seconds.
Parent topic: Commands I