lldp advertise power-via-mdi
Advertises general information about Power over Ethernet (PoE) capabilities and the
status of the port.
Syntax
lldp advertise power-via-mdi
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
no lldp advertise power-via-mdi
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
Command Default
Information about PoE capabilities and port status is not advertised.
Parameters
Modes
Global configuration mode
Usage Guidelines
The power-via-MDI information includes the following:
- PoE capability (supported or not supported)
- PoE status (enabled or disabled)
- Power Sourcing Equipment (PSE) power pair—Indicates which pair of wires is in use and whether the pair selection can be controlled. The RUCKUS implementation always uses pair A and cannot be controlled.
- Power class—Indicates the range of power that the connected powered device has negotiated or requested.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.