show ip pim all-vrf

Displays Protocol Independent Multicast (PIM) information across all active VRFs..
Syntax
show ip pim all-vrf [ bsr | error | flow-count | hw-resource | resource | rp-set | traffic [ join-prune ] [ rx | tx ] ]
show ip pim all-vrf interface [ ethernet unit/slot/port | lag number | loopback loopback-number | tunnel number | ve ve-number ]
show ip pim all-vrf neighbor neighbor [ ethernet unit/slot/port | lag number | tunnel number | ve ve-number ]
Parameters
bsr
Specifies bootstrap router (BSR) information.
error
Specifies PIM errors.
flow-count
Specifies flowcache counters.
hw-resource
Specifies usage and fail-count information for SG entries.
resource
Specifies the hardware resource information, such as hardware allocation, availability, and limit, for software data structures.
rp-set
Specifies rendezvous-point (RP)-set list for the device elected as the bootstrap router (BSR).
traffic
Specifies IPv4 PIM traffic statistics.
join-prune
Specifies displaying join and prune statistics.
rx
Specifies received PIM traffic statistics.
tx
Specifies transmitted PIM traffic statistics.
interface
Specifies an interface.
lag number
Specifies a LAG interface.
loopback loopback-number
Specifies a loopback interface.
tunnel number
Specifies a GRE tunnel.
ve ve-number
Specifies a virtual interface.
neighbor
Specifies an IP PIM neighbor.
Modes

User EXEC mode

Examples

The following example displays usage and fail-count information for SG entries for all active VRFs. 

device> show ip pim all-vrf hw-resource

VRF Usage Fail
default-vrf 3072 8
blue 3072 0
-------------------------------
Total usage 6144
System-max limit for SG entries: 6144
History
Parent topic: Show Commands