clear ipv6 neighbor inspection

Clears the static neighbor discovery (ND) inspect entries and ND inspection statistics.
Syntax
clear ipv6 neighbor [ vrf vrf-name ] inspection [ static-entry | statistics ]
Parameters
vrf
Specifies the VRF instance (optional).
vrf-name
Specifies the ID of the VRF instance required with vrf .
inspection
Specifies that the neighbor discovery messages are verified against the static ND inspection entries or dynamically learned DHCPv6 snoop entries.
static-entry
Clears the manually configured static ND inspect entries that are used to validate the packets received on untrusted ports.
statistics
Clears the total number of neighbor discovery messages received and the number of packets discarded after ND inspection.
Modes

Privileged EXEC mode

Global configuration mode

VRF configuration mode

Usage Guidelines

This command can be used in three different modes as shown in the examples. If used without specifying a VRF, this command clears data from the default VRF.

Examples

The following example removes the manually configured static ND inspect entries. 

device# clear ipv6 neighbor inspection static-entry

The following example removes the manually configured static ND inspect entries on a VRF. 

device# configure terminal
device(config)# vrf vrf2
device(config-vrf-vrf2)# clear ipv6 neighbor vrf vrf2 inspection static-entry

The following example deletes the ND inspection statistics. 

device# configure terminal
device(config)# clear ipv6 neighbor inspection statistics

The following example deletes the ND inspection statistics on a VRF. 

device# configure terminal
device(config)# clear ipv6 neighbor vrf vrf2 inspection statistics
History
Release version Command history
08.0.20 This command was introduced.
Parent topic: Commands C