`l2protocol dot1q-tunnel drop-threshold`

Configures the maximum number of packets that can be processed on an interface for Q-in-Q BPDU tunneling before being dropped.

Syntax

l2protocol dot1q-tunnel drop-threshold

{ all | cdp | lacp | lldp | stp } threshold-value

no l2protocol dot1q-tunnel drop-threshold { all | cdp | lacp | lldp | stp } threshold-value

Parameters

all: Configures the drop threshold for all protocol packets.
cdp: Configures the drop threshold for CDP packets.
lacp: Configures the drop threshold for LACP packets.
lldp: Configures the drop threshold for LLDP packets.
stp: Configures the drop threshold for STP packets.
threshold-value: Specifies the threshold rate in packets per second. Valid values are from are from 1 through 4096.

Modes

Interface configuration mode

Usage Guidelines

When the all option is used on an interface, individual protocol option cannot be used.

The no form of the command resets the threshold values to 0 and disables the drop threshold.

Examples

The following example configures the port drop threshold value for a Q-in-Q tunneling port.

device(config)# interface ethernet 1/1/1
(config-if-e1000-1/1/1)# l2protocol dot1q-tunnel drop-threshold all 3000

History

Release version	Command history
08.0.70	This command was introduced.

l2protocol dot1q-tunnel drop-threshold