ipv6 ospf cost

Configures cost for a specific OSPFv3 interface.
Syntax
ipv6 ospf cost value
no ipv6 ospf cost
Command Default

Cost value is 1.

Parameters
value
Cost value. Valid values range from 1 through 65535. The default is 1.
Modes

Interface subtype configuration mode

Usage Guidelines

Use this command to set or reset the OSPFv3 cost on the interface. If the cost is not configured with this command, OSPFv3 calculates the value from the reference and interface bandwidths.

For more information, refer to the auto-cost reference-bandwidth command.

The no form of the command disables the configured cost.

Examples

The following example sets the cost to 620 on a specific OSPFv3 Virtual Ethernet (VE) interface. 

device# configure terminal
device(config)# interface ve 1
device(config-vif-11)# ipv6 ospf cost 620
History
Parent topic: Commands I