management vrf

Configures a Virtual Routing and Forwarding (VRF) as a global management VRF.
Syntax
management vrf vrf-name strict
no management vrf vrf-name strict
Command Default

A management VRF is not configured.

Parameters
vrf-name
Specifies the name of a preconfigured VRF.
strict
Specifies management VRF strict mode.
Modes

Global configuration mode

Usage Guidelines

If the VRF is not preconfigured, command execution fails, and an error message is displayed. If you try to delete a management VRF that was not configured, the system displays an error message.

If a VRF is currently configured as the management VRF, it cannot be deleted or modified. Attempting to do so causes the system to return an error message. If a management VRF is already configured, you must remove the configuration before configuring a new one.

The no form of the command removes the management VRF. When the management VRF is deleted, a syslog message is displayed.

Examples

The following example configures a management VRF. 

device# configure terminal
device(config)# management vrf mvrf

The following example configures a strict management VRF.

device# configure terminal
device(config)# management vrf red strict
History
Release version Command history
09.0.00 This command was introduced.
Parent topic: Commands M