no-dynamic-aging

Disables aging of ports that are dynamically assigned to the protocol or subnet-based VLANs.
Syntax
no-dynamic-aging
no no-dynamic-aging
Command Default

The dynamic protocol VLAN ages out after 10 or 20 minutes, if no packets are received.

Modes

IP protocol VLAN configuration mode

IPX protocol VLAN configuration mode

AppleTalk protocol VLAN configuration mode

DECnet protocol VLAN configuration mode

NetBIOS protocol VLAN configuration mode

Other protocol VLAN configuration mode

IPV-6 protocol VLAN configuration mode

Usage Guidelines
Note: Configure the command only if your configuration includes dynamically assigned VLAN memberships for protocol or subnet VLANs.

The no form of the command enables aging of the dynamic protocol VLAN.

Examples

The following example shows how to configure dynamic aging.

device(config)# vlan 10 by port
device(config-vlan-10)# interface ethernet 1/1/1 to 1/1/5
device(config-vlan-10)# ip-proto name IP_Prot_VLAN
device(config-vlan-ip-proto)# no-dynamic-aging