show traffic-policy

Displays traffic policies that are currently defined on the device.
Syntax
show traffic-policy [ TPD-name ]
Parameters
TPD-name
Specifies the name of the traffic policy.
Modes

User EXEC mode

Privileged EXEC mode

Global configuration mode

Interface configuration mode

The show traffic-policy command displays the following information.

Output field Description
Traffic Policy The name of the traffic policy.
Metering Shows whether rate limiting is configured as part of the traffic policy:
  • Enabled: The traffic policy includes a rate-limiting configuration.
  • Disabled: The traffic policy does not include a rate-limiting configuration.
Mode If rate limiting is enabled, this field shows the type of metering enabled on the port:
  • Fixed Rate-Limiting
  • Adaptive Rate-Limiting
cir The committed information rate, in kilobits per second, for the adaptive rate-limiting policy.
cbs The committed burst size, in bytes, for the adaptive rate-limiting policy.
pir The peak information rate, in kilobits per second, for the adaptive rate-limiting policy.
pbs The peak burst size, in bytes, for the adaptive rate-limiting policy.
Counting Shows whether ACL counting is configured as part of the traffic policy:
  • Enabled: The traffic policy includes an ACL counting configuration.
  • Not Enabled: The traffic policy does not include an ACL counting configuration.
Number of References/Bindings

The number of port regions to which this traffic policy applies.

Examples

The following example is sample output from the show traffic-policy command. The output displays traffic policies that are currently defined on the device. 

device# show traffic-policy t_voip

Traffic Policy - t_voip:
Metering Enabled, Parameters:
Mode: Adaptive Rate-Limiting
cir: 100 Pkts/s, cbs: 2000 Pkts, pir: 200 Pkts/s, pbs: 4000 Pkts
Counting Not Enabled
Parent topic: Show Commands