show ip pim rp-candidate

Displays candidate rendezvous point (RP) information.
Syntax
show ip pim rp-candidate
Modes

User EXEC mode

The show ip pim rp-candidate command displays the following information:

Output Field

Description

Candidate-RP-advertisement in

How time will pass before the BSR sends the next RP message. The time is displayed in "hh:mm:ss" format.

Note: This field appears only if this device is a candidate RP.

RP

The IP address of the RP.

Note: This field appears only if this device is a candidate RP.

group prefixes

The multicast groups for which the RP listed by the previous field is a candidate RP.

Note: This field appears only if this device is a candidate RP.

Candidate-RP-advertisement period

How frequently the BSR sends candidate RP advertisement messages.

Note: This field appears only if this device is a candidate RP.
Examples

The following example shows information for a candidate RP. 

device> show ip pim rp-candidate

Next Candidate-RP-advertisement in 00:00:10
  RP: 207.95.7.1
    group prefixes:
    224.0.0.0 / 4
  Candidate-RP-advertisement period: 60
Parent topic: Show Commands