`system-max l3-interface`

Configures the maximum number of Layer 3 interfaces that can be configured on a system for ICX 7150 devices.

Syntax

system-max l3-interface num

no system-max
                  					l3-interface

num

Command Default

By default, 128 Layer 3 interfaces can be configured in a system.

Parameters

num: Specifies the maximum number of the Layer 3 interfaces that can be configured. Valid values range from 1 through 382.

Modes

Global configuration mode

Usage Guidelines

This command is supported for ICX 7150 devices only. For other platforms, refer to the system-max virtual-interface command.

The no form of the command removes the configured maximum number of Layer 3 interfaces and resets the maximum value to the default.

Examples

The following example shows how to increase the maximum number of layer 3 interfaces.

device# configure terminal
device(config)# system-max l3-interface 129
device(config)# write memory
device(config)# end
device# reload

History

Release version	Command history
08.0.61	This command was introduced for ICX 7150 devices.

system-max l3-interface