webpage terms

Customizes the text box that appears on the Web Authentication Login page.
Syntax
webpage terms copy tftp { ipv4-address | ipv6-address } file-name
no webpage terms copy tftp { ipv4-address | ipv6-address } file-name
Command Default

By default, the text box is empty and is not visible.

Parameters
copy tftp
Copies an ASCII text file from a TFTP server to the switch.
ipv4-address
The IPv4 address of the TFTP server.
ipv6-address
The IPv6 address of the TFTP server.
file-name
Specifies the name of the text file on the TFTP server.
Modes

Web Authentication configuration mode

Usage Guidelines

The text file size must not exceed 2 KB.

Note: The webpage terms command downloads the text file and stores it in the device flash memory. Therefore, it is not necessary to follow this command with a write memory command.

The no form of the command reverts back to the default; that is, the text box is empty and not visible.

Examples

The following example shows how to create or replace a text box.

device(config)# vlan 10
device(config-vlan-10)# webauth
device(config-vlan-10-webauth)# webpage terms copy tftp 10.10.5.1 policy.txt