enable (LAG)

Enables an individual port within a LAG.
Syntax
enable port-name name
enable ethernet unit/slot/port [ to unit/slot/port | [ ethernet unit/slot/port to unit/slot/port | ethernet unit/slot/port ] [ lag lag-id to lag-id | lag lag-id ]... ]
Command Default

Ports within a LAG are not enabled.

Parameters
port-name name
Enables a named port within a LAG.
ethernet unit/slot/port
Enables the specified Ethernet port within the LAG.
to unit/slot/port
Enables a range of ports within the LAG.
lag lag-id
Enables the LAG virtual interface.
Modes

LAG configuration mode

Usage Guidelines

To enable a port belonging to a keep-alive LAG, you must use the enable command from the interface configuration mode.

Examples

The following example shows how to enable a port within a LAG configuration. 

device(config)# lag blue static id 1
device(config-lag-blue)# ports ethernet 1/1/1 ethernet 1/1/5
device(config-lag-blue)# enable ethernet 1/3/1

The following example shows how to enable a port belonging to a keep-alive LAG. 

device(config)# lag test keep-alive
device(config-lag-test)# interface ethernet 1/1/1
device(config-if-e1000-1/1/1)# enable
History
Release version Command history
08.0.61 This command was modified to add lag lag-id options.
Parent topic: Commands D through H