ipv6 router vrrp
Globally enables IPv6 Virtual Router Redundancy Protocol (VRRP).
Command Default
IPv6 VRRP is not globally enabled.
Modes
Global configuration mode
Usage Guidelines
After globally enabling IPv6 VRRP, the command prompt does not change. Nearly all subsequent IPv6 VRRP configuration is performed at the interface level, but IPv6 VRRP must be enabled globally before configuring IPv6 VRRP instances.
The
no form of the command disables VRRP globally.
Note: Only 16 VRRP instances are configurable on the ICX 7150 device.
Examples
The following example enables IPv6 VRRP globally and enters interface configuration mode to allow you to enter more VRRP configuration.
device# configure terminal device(config)# ipv6 router vrrp device(config-ipv6-vrrp-router)# interface ethernet 1/1/4 device(config-if-e1000-1/1/4)# ipv6 address fd3b::3/64 device(config-if-e1000-1/1/4)# ipv6 vrrp vrid 2 device(config-if-e1000-1/1/4-vrid-2)# backup priority 100 device(config-if-e1000-1/1/4-vrid-2)# version 3 device(config-if-e1000-1/1/4-vrid-2)# advertise backup device(config-if-e1000-1/1/4-vrid-2)# ipv6-address fe80::768e:f8ff:fe2a:0099 device(config-if-e1000-1/1/4-vrid-2)# ipv6-address fd3b::2 device(config-if-e1000-1/1/4-vrid-2)# activate