multicast router-port
multicast router-port
{
[
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
[
lag
lag-id
[
to
lag-id
]
... ]
}
no multicast router-port
{
[
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
[
lag
lag-id
[
to
lag-id
]
... ]
}
The device forwards all multicast control and data packets only to router ports that receive queries.
VLAN configuration mode
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
You can combine individual Ethernet ports, Ethernet port ranges, LAGs, and LAG ranges in the same command if you wish.
The
no form of this command restores the default, that is, the device forwards all multicast
control and data packets only to router ports that receive queries.
This example configures a static port on Ethernet 1/1/3 on VLAN 70.
device# configure terminal device(config)# vlan 70 device(config-vlan-70)# multicast router-port ethernet 1/1/3
This example configures a list of static ports on VLAN 70.
device# configure terminal device(config)# vlan 70 device(config-vlan-70)# multicast router-port ethernet 1/1/24 ethernet 1/6/24 ethernet 1/8/17
This example configures a range of static ports on VLAN 70.
device# configure terminal device(config)# vlan 70 device(config-vlan-70)# multicast router-port ethernet 1/1/1 to 1/1/8
| Release version | Command history |
|---|---|
| 08.0.61 | This command was modified to include LAG ID options. |