`mvrp enable (Interface)`

Enables Multiple VLAN Registration Protocol (MVRP) on an interface or on multiple physical interfaces.

Syntax

mvrp enable

no mvrp enable

Command Default

MVRP is disabled by default.

Modes

Interface configuration mode

Usage Guidelines

MVRP must be enabled globally to allow the device to participate in the protocol.

The no form of the command disables MVRP on the specified interface or set of interfaces.

Examples

The following example enables MVRP on an interface.

device# configure terminal
device(config)# interface ethernet 1/1/25
device(config-if-e1000-1/1/25)# mvrp enable

The following example enables MVRP on multiple physical interfaces.

device# configure terminal
device(config)# interface ethernet 1/1/5 to 1/1/10
device(config-mif-1/1/5-1/1/10)# mvrp enable

History

Release version	Command history
08.0.90	This command was introduced.

mvrp enable (Interface)