lldp snmp-notification-interval

Configures the minimum time between SNMP traps and syslog messages.
Syntax
lldp snmp-notification-interval seconds
no lldp snmp-notification-interval
Command Default

The default time between transmission of SNMP traps and syslog messages is 5 seconds.

Parameters
seconds
Configures the time, in seconds, between transmission of SNMP traps and syslog messages. The value can range from 5 through 3600. The default is 5.
Modes

Global configuration mode

Usage Guidelines

When SNMP notifications and syslog messages for LLDP are enabled, the device will send no more than one SNMP notification and corresponding syslog message within a 5-second period.

The no form of the command removes the configured value and restores the time between transmission of SNMP traps and syslog messages to the default of 5 seconds.

Examples

The following example sets the minimum time interval between traps and syslog messages to 60 seconds. 

device(config)# lldp snmp-notification-interval 60
Parent topic: Commands J, K, and L