rate-limit output

Configures the maximum rate at which outbound traffic is sent on a port priority queue or on a LAG port.
Syntax
rate-limit output shaping value [ priority priority-queue ]
no rate-limit output shaping value [ priority priority-queue ]
rate-limit output shaping ethe stack/slot/port value [ priority priority-queue ]
no rate-limit output shaping ethe stack/slot/port value [ priority priority-queue ]
Parameters
shaping value
Specifies the rate-shaping limit.
ethernet stackislot/port
Specifies the Ethernet port.
priority priority-queue
Specifies a rate-shaping priority. The value can range from 0 to 7.
Modes

Interface configuration mode

LAG configuration mode

Usage Guidelines

The no form of the command removes the output rate shaping.

Examples

The following example configures the maximum rate at which outbound traffic is sent on a port priority queue 

device(config)# interface ethernet 1/2/1
device(config-if-e1000-1/2/1)# rate-limit output shaping 500 priority 7

The following example configures the maximum rate at which outbound traffic is sent on a LAG port. 

device(config)# lag lag1 static
device(config-lag-lag1)# rate-limit output shaping ethe 1/1/15 651
Parent topic: Commands O, P, Q, R, and Sa through Sh