ipv6 multicast-routing rpf-check mac-movement
Triggers Reverse Path Forwarding (RPF) check on MAC movement for directly connected
sources and sends a MAC address movement notification to the Protocol Independent
Multicast (PIM) module which results in PIM convergence.
Command Default
RPF check on MAC movement for directly connected sources is not enabled.
Modes
Global configuration mode
Usage Guidelines
PIM convergence on MAC movement is applicable only in a topology where the multicast source port and PIM routers are in the same Layer 2 domain.
IPv6 PIM Dense mode is not supported for PIM convergence on MAC movement.
The
no
form of the command disables RPF check on MAC movement for directly connected sources.
History