`inline power install-firmware`

Installs Power over Ethernet (PoE) firmware.

Syntax

 inline power
                  					install-firmware

{ all | stack-unit unit-number } tftp ip-address file-name

Parameters

all: Installs Firmware on all PoE units of the system.
stack-unit unit-number: Specifies the unit ID of the stack. If the switch is not a part of the stack, the unit number is the default value. The default stack-unit value is 1.
tftp ip-address: Specifies the IP address of the TFTP server.
file-name: Specifies the name of the file, including its path name.

Modes

Privileged EXEC mode

Usage Guidelines

In releases prior to 08.0.61, PoE firmware installation could be initiated only on one stack unit at a time.

From 08.0.61 release onwards, PoE firmware installation can also be initiated on all PoE units, or on multiple stack units simultaneously.

Examples

The following example installs PoE firmware on all PoE units.

device# inline power install-firmware all tftp 10.120.54.161 icx74xx_poh_01.2.1.b003.fw

The following example installs PoE firmware on a stack unit.

device# inline power install-firmware stack-unit 1 tftp 10.120.54.161 icx74xx_poh_01.2.1.b003.fw

History

Release version	Command history
08.0.61	The command was modified to add the all keyword.

inline power install-firmware