bpdu-flood-enable

Configures the MCT cluster devices to flood the SSTP or MSTP BPDUs in the SSTP or MSTP domain.
Syntax
bpdu-flood-enable
no bpdu-flood-enable
Command Default

BPDU flooding is not enabled.

Modes

Global configuration mode

Usage Guidelines

When bpdu-flood-enable is configured, there should not be any links other than the ICL connecting the two MCT cluster devices. If there is an additional link, then the flooded BPDU will cause a loop and high CPU utilization.

The no form of the command disables the BPDU flooding.

Examples

The following example shows how to configure BPDU flooding on the device. 

device(config)# bpdu-flood-enable
Warning - Any recieved untagged BPDUs will now be flooded to all the ports.
Parent topic: Commands A and B