system-max ip6-route

Configures maximum IPv6 routes, used to initialize hardware during system init.
Syntax
system-max ip6-route number
no system-max ip6-route number
Command Default

The default number of routes depends on the platform. Refer to the Usage Guidelines section.

Parameters
number
Specifies the number of IPv6 routes. Refer to the Usage Guidelines section.
Modes

Global configuration mode

Usage Guidelines

For ICX 8200, ICX 8100, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information.

The maximum and minimum number of IPv6 routes that can be configured depends on the platform.

Platform Minimum Default Maximum
ICX 7250 N/A N/A N/A
ICX 7450 N/A N/A N/A
ICX 7650 5120 5120 7168
ICX 7750 5120 5120 7168

The no form of the command resets the number of IPv6 routes to the default value.

Examples

The following example configures the number of IPv4 routes as 5000. 

device# configure terminal
device(config)# system-max ip6-route 5000
device(config)# write memory
Parent topic: Commands Si - Z