clear ipv6 pim rp-map

Clears the entries in an IPv6 PIM Sparse static multicast forwarding table, allowing a new rendezvous point (RP) configuration to be effective immediately.
Syntax
clear ipv6 pim [ vrf vrf-name ] rp-map
Parameters
vrf vrf-name
Specifies a VRF instance.
rp-map
Specifies the entries in a PIM sparse static multicast forwarding table.
Modes

Privileged EXEC mode

Usage Guidelines

Configuring this command clears and overwrites the static RP configuration. If you change the static RP configuration, the entries in the IPv6 PIM Sparse multicast forwarding table continue to use the old RP configuration until they are aged out. You can configure the clear ipv6 pim rp-map command to update the entries in the static multicast forwarding table immediately after making RP configuration changes.

This command is meant to be used with the rp-address command.

Examples

This example shows how to clear the entries in an IPv6 PIM Sparse static multicast forwarding table after you change the RP configuration: 

Device#clear ipv6 pim rp-map
Parent topic: Commands C