lldp advertise mac-phy-config-status
Advertises the MAC/PHY configuration and status.
Syntax
lldp advertise mac-phy-config-status
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
no lldp advertise mac-phy-config-status
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
Command Default
The MAC/PHY configuration and status are automatically advertised when Link Layer Discovery Protocol (LLDP) is enabled on a global basis.
Parameters
Modes
Global configuration mode
Usage Guidelines
The MAC and PHY configuration and status of time, length, and value (TLV) includes the following information:
- Auto-negotiation capability and status.
- Speed and duplex mode.
- Flow control capabilities for auto-negotiation.
- Maximum port speed advertisement.
- If applicable, whether the preceding settings are the result of auto-negotiation during link initiation or a manual set override action.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.
The
no form of the command disables the MAC/PHY advertisement.