ikev2 profile

Creates an Internet Key Exchange version 2 (IKEv2) profile and enters IKEv2 profile configuration mode.
Syntax
ikev2 profile name
no ikev2 profile name
Command Default

The default IKEv2 profile is def-ike-profile.

Parameters
name
Specifies the name of an IKEv2 profile.
Modes

Global configuration mode

Usage Guidelines

An IKEv2 profile defines the local and peer identities and the authentication proposal for an IKEv2 session.

The default IKEv2 profile (def-ike-profile) does not require configuration and has the following settings:

  • authentication: def-ike-auth-prop
  • protected: Any
  • local-identifier address: 0.0.0.0
  • lifetime: 2592000
  • keepalive: 300

Use the ikev2 profile command to configure any additional IKEv2 profiles.

The no form of the command removes any IKEv2 profile configuration other than the default IKEv2 profile.

The default IKEv2 profile cannot be removed.

Examples

The following example shows how to create an IKEv2 profile named ikev2_profile1. 

device# configure terminal
device(config)# ikev2 profile ikev2_profile1
device(config-ike-profile-ikev2_profile1)#
History
Release version Command history
08.0.50 This command was introduced.
Parent topic: Commands I