copy flash disk0
Copies the image binary or a specified
file stored in flash to the external USB flash drive.
Syntax
copy flash disk0
{
system-manifest
|
ufi-primary
image-file
|
ufi-secondary
image-file
|
file
source-file
destination-file
|
primary
image-file
|
secondary
image-file
}
Parameters
Modes
Privileged EXEC mode
Usage Guidelines
Use the show files disk0
command to verify the files copied.
Examples
The following example shows copying the primary partition's UFI to USB.
device# copy flash disk0 ufi-primary ufip.bin Parameter Validation Successful Image Upload to USB started Image Upload to USB Done Image Upload Complete
The following example copies the startup-config file from the flash and saves it as the file startup.txt on the USB.
device# copy flash disk0 file startup-config.txt startup.txt Parameter Validation Successful File Upload to USB started File Upload to USB Done File Upload Complete
The following example shows copying the image binary stored in the primary partition of the flash to the external USB.
device# copy flash disk0 primary p.bin Parameter Validation Successful Image Upload to USB started Image Upload to USB Done Image Upload Complete
The following example shows copying the manifest package from flash to USB.
device# copy flash disk0 system-manifest Parameter Validation Successful USB Manifest Upload in progress... Manifest file Upload to USB Done Signature Upload to USB started Signature Upload to USB Done Image Upload to USB started Image Upload to USB Done Config Upload to USB started Config Upload to USB Done Manifest Upload Complete
History
| Release version | Command history |
|---|---|
| 08.0.30 | This command was introduced. |
| 09.0.00 | This command was modified to add the system-manifest, ufi-primary, and ufi-secondary options. |