show ipv6 bgp dampened-paths

Displays all BGP4+ dampened routes.
Syntax
show ipv6 bgp dampened-paths
Modes

User EXEC mode

The show ipv6 bgp dampened-paths command displays the following information:

Output field Description

Status codes

A list of the characters the display uses to indicate the path’s status. The status code appears in the left column of the display, to the left of each route. The status codes are described in the command’s output. The status column displays a "d" for each dampened route.

Network

The destination network of the route.

From

The IPv6 address of the advertising peer.

Flaps

The number of times the path has flapped.

Since

The amount of time (in hh:mm:ss) since the first flap of this route.

Reuse

The amount of time (in hh:mm:ss) after which the path is available again.

Path

The AS path of the route.

Examples

The following example displays BGP4+ paths that have been dampened (suppressed) by route flap dampening. 

device> show ipv6 bgp dampened-paths

Status Code >:best d:damped h:history *:valid
	Network              From 			      Flaps 	Since 	Reuse 	Path
*d 	2001:db8::/13 	   2001:db8:1::1 	1 	0 :1 :14 	0 :2 :20 	100 1002 1000
*d 	2001:db8::/16 			 2001:db8:1::1 	1 	0 :1 :14 	0 :2 :20 	100 1002 1000
*d 	2001:db8::/14 			 2001:db8:1::1 	1 	0 :1 :14 	0 :2 :20 	100 1002 1000
*d 	2001:db8::/15 			 2000:1:1::1 	  1  0 :1 :14 	0 :2 :20 	100 1002 1000
*d 	2001:db8:8000::/17 2001:db8:1::1 1 	0 :1 :14 	0 :2 :20 	100 1002 1000
*d 	2001:db8:1:17::/64	2001:db8:1::1 1 	0 :1 :18 	0 :2 :20 	100
Parent topic: Show Commands