loop-detection-interval
Configures how often a test packet is sent on a port.
Command Default
Loop detection time is set to 1 second.
Parameters
Modes
Global configuration mode
Usage Guidelines
When loop detection is enabled, the loop-detection time unit is 0.1 second, with a
default of 10 (1 second). The range is from 1 (one tenth of a second) to 100 (10 seconds).
You can use the
show loop-detection status command to view the loop-detection interval.
The
no form of the command sets the loop detection interval to the default global loop-detection
interval of 1 second.