delay-server

Delays the Network Time Protocol (NTP) server response so that the synchronization time is not sent to NTP clients until the device has synchronized with an external NTP server.
Syntax
delay-server
no delay-server
Command Default

Delaying the NTP server response is disabled by default.

Modes

NTP configuration mode

Usage Guidelines

To delay the response for the client until ICX NTP is synchronized, this command should be used immediately after enabling NTP.

The no form of the command disables the delay for the NTP server response.

Examples

The following example enables the NTP client and server mode and delays the NTP server response so that the synchronization time is not sent to NTP clients until the device has synchronized with an external NTP server.

device# configure terminal
device(config)# ntp
device(config-ntp)# delay-server
History
Release version Command history
08.0.95m, 10.0.20, 10.0.10d This command was introduced.
Parent topic: Commands D through H