show ipv6 cache
Displays IPv6 cache information.
Syntax
show ipv6 cache
[
vrf
vrf-nam
]
[
index
|
ipv6-address
|
ipv6-prefix/prefix-length
|
resource
|
ethernet
stack/slot/port
|
tunnel
tunnel-id
|
ve
ve-num]
Parameters
- vrf vrf-name
- Displays the IPv6 cache information for the specified Virtual Routing/Forwarding (VRF) instance.
- ipv6-address
- Restricts the display to the entries for the specified IPv6 address. Specify this parameter in hexadecimal using 16-bit values between colons as documented in RFC 2373.
- ipv6-prefix/prefix-length
- Restricts the display to the entries for the specified IPv6 prefix. Specify the ipv6-prefix parameter in hexadecimal using 16-bit values between colons as documented in RFC 2373. Specify the prefix-length parameter as a decimal value. A slash mark (/) must follow the ipv6-prefix parameter and precede the prefix-length parameter.
Modes
User EXEC mode
The
show ipv6 cache command displays the following information:
Examples
The following example displays the IPv6 cache information.
device# show ipv6 cache Total number of cache entries: 10 IPv6 Address Next Hop Port 1 2001:DB8::2 LOCAL tunnel 2 2 2001:DB8::106 LOCAL ethe 1/3/2 3 2001:DB8::110 DIRECT ethe 1/3/2 4 2001:DB8:46a::1 LOCAL ethe 1/3/2 5 2001:DB8::2e0:52ff:fe99:9737 LOCAL ethe 1/3/2 6 2001:DB8::ffff:ffff:feff:ffff LOCAL loopback 2 7 2001:DB8::c0a8:46a LOCAL tunnel 2 8 2001:DB8::c0a8:46a LOCAL tunnel 6 9 2001:DB8::1 LOCAL loopback 2 10 2001:DB8::2e0:52ff:fe99:9700 LOCAL ethe 1/3/1