Enables policy-based routing (PBR).
Syntax
ip policy route-mapmap-nameno ip policy route-mapmap-name
Command Default
PBR is not enabled.
Parameters
- map-name
- Specifies the name of the route map.
Modes
Global configuration mode
Interface configuration mode
Virtual interface configuration mode
Usage Guidelines
This command can be used to enable PBR globally on all interfaces or on a specific
interface.
The
no form of the command disables PBR.
Examples
The following example enables PBR globally.
device(config)# route-map map1
device(config-routemap map1)# exit
device(config)# ip policy route-map map1
The following example enables PBR on a specific interface.
device(config)# interface ethernet 1/1/1
device(config-if-e1000-1/1/1)# ip policy route-map map1