multicast6 static-group
multicast6 static-group
ipv6-address
[
count
num
]
{
[
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
[
lag
lag-id
[
to
lag-id
]
... ]
}
no multicast6 static-group
ipv6-address
[
count
num
]
{
[
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
[
lag
lag-id
[
to
lag-id
]
... ]
}
The VLAN cannot forward multicast traffic to ports that do not receive MLD membership reports.
VLAN configuration mode
A snooping-enabled VLAN cannot forward multicast traffic to ports that do not receive MLD membership reports. To allow clients to send reports, you can configure a static group that applies to individual ports on the VLAN. The static group forwards packets to the static group ports even if they have no client membership reports.
You cannot configure a static group that applies to an entire VLAN.
The maximum number of supported static groups in a VLAN is 512, and the maximum number of supported static groups for individual ports in a VLAN is 256.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
You can combine individual Ethernet ports, Ethernet port ranges, LAGs, and LAG ranges in the same command if you wish.
The
no form of this command removes the static group fromr the VLAN.
| Release version | Command history |
|---|---|
| 08.0.61 | This command was modified to include LAG ID options. |