webauth-redirect-address

Configures a redirect address for Web Authentication to prevent the display of error messages saying that the certificate does not match the name of the site.
Syntax
webauth-redirect-address address-string
no webauth-redirect-address [ address-string ]
Command Default

By default, the Web Authentication address returned to the browser is the IP address of the switch.

Parameters
address-string
Specifies the redirect address. You can specify up to 64 alphanumeric characters.
Modes

Global configuration mode

Web Authentication configuration mode

Usage Guidelines

You can enter any value for the address string , but entering the name on the security certificate prevents the display of error messages saying that the security certificate does not match the name of the site.

On a Layer 2 device, the command is supported in Global configuration mode and on a Layer 3 device the command is supported in Web Authentication configuration mode.

The no form of the command resets the redirect address to that of the IP address of the switch.

Examples

The following example shows how to set the Web Authentication redirect address on a Layer 3 switch. 

device(config)# vlan 10
device(config-vlan-10)# webauth
device(config-vlan-10-webauth)# webauth-redirect-address my.domain.net
Parent topic: Commands Si - Z