Displays the details of a specific mesh-group.
Syntax
show ip msdp
[
vrf
vrf-name
]
mesh-group
group-name
Parameters
- vrf
- Displays the mesh-group details for the VRF instance specified by the
vrf-name variable.
- vrf-name
- Specifies the VRF instance.
- mesh-group
- Specifies the MSDP group.
- group-name
- Specifies the mesh group.
Modes
Privileged EXEC mode
Global configuration mode
MSDP router configuration mode
Usage Guidelines
If used without specifying a VRF, this command shows data from the default VRF.
The
show ip msdp
[
vrf
vrf-name
]
mesh-group
group-name
command displays the following information:
| Output field
|
Description
|
| Peer Address
|
The IP address of the MSDP peer that is placed in the mesh group.
|
| State
|
The state of the MSDP device connection with the mesh group. The state can be one
of the following:
- CONNECT - The session is in the active open state.
- ESTABLISH - The MSDP session is fully up.
- IDLE - The session is idle.
- LISTEN - The session is in the passive open state.
|
| KA (Keep Alive) In
|
The number of MSDP keepalive messages received by the mesh group.
|
| KA (Keep Alive) Out
|
The number of MSDP keepalive messages sent by the mesh group.
|
| SA (Source-Active) In
|
The number of SA messages received by the mesh group.
|
| SA (Source-Active) Out
|
The number of SA messages sent by the mesh group.
|
| NOT (Notification) In
|
The number of notification messages received by the mesh group.
|
| NOT (Notification) out
|
The number of notification messages sent by the mesh group.
|
| Age
|
The number of seconds the messages has been in the cache.
|
Examples
The following example shows the mesh-group configuration details.
device#show ip msdp mesh-group
Mesh-Group-Name Peer-IP-Address
group1 40.0.0.40
group2 21.0.0.23
The following example shows the details of mesh-group group1.
device#show ip msdp mesh-group group1
MSDP MESH-GROUP:group1
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address State KA SA NOT Age
In Out In Out In Out
40.0.0.40 ESTABLISH 1407 1406 0 0 0 0 6
The following example shows the mesh-group configuration details for the VRF 10 instance.
device#show ip msdp vrf 10 mesh-group
Mesh-Group-Name Peer-IP-Address
group1 22.0.0.22
group2 21.0.0.23
The following example shows the mesh-group group2 details for the VRF 10 instance.
device#show ip msdp vrf 10 mesh-group group2
MSDP MESH-GROUP:group2
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address State KA SA NOT Age
In Out In Out In Out
21.0.0.23 IDLE 0 0 0 0 0 0 0
History
| Release version
|
Command history
|
| 08.0.20
|
This command was introduced.
|