show ipv6 pim traffic
Displays IPv6 PIM traffic statistics.
Parameters
Modes
Privileged EXEC mode
Usage Guidelines
PIM control packet statistics for interfaces that are configured for standard PIM are listed first by the display.
The
show ipv6 pim traffic command displays the following information:
Examples
This example shows PIM traffic statistics:
Device# show ipv6 pim traffic
Port HELLO JOIN-PRUNE ASSERT REGISTER REGISTER BOOTSTRAP CAND. RP Err
GRAFT(DM) STOP(SM) MSGS (SM) ADV. (SM)
-------+---------+-----------+---------+---------+---------+---------+---------+---
Rx Rx Rx Rx Rx Rx Rx Rx
------+---------+-----------+---------+---------+---------+---------+---------+---
v170 0 0 0 0 0 0 0 0
v501 0 0 0 0 0 0 0 0
v503 3302 2524 0 0 0 0 0 0
Port HELLO JOIN-PRUNE ASSERT REGISTER REGISTER BOOTSTRAP CAND. RP Err
GRAFT(DM) STOP(SM) MSGS (SM) ADV. (SM)
-------+---------+-----------+---------+---------+---------+---------+---------+---
Tx Tx Tx Tx Tx Tx Tx
------+---------+-----------+---------+---------+---------+---------+---------+---
v170 3576 0 0 0 0 0 0
v501 1456 0 0 0 0 0 0
v503 1456 1314 0 0 0 2 0
This example shows the number of received IPv6 PIM Hello packets dropped on interface 1/1/9 to because an ACL to control neighbor access is configured on it.
Device#show ipv6 pim traffic rx
Port HELLO JN-PRN ASSERT REG REG BTSTRP CAND RP Err
GRFT(DM) STOP(SM) MSGS(SM) ADV.(SM)
-------+--------+------+------+------+------+---------+----------+-----
Rx Rx Rx Rx Rx Rx Rx
Rx
-------+-------+------+------+-------+------+---------+---------+------
e1/1/1 0 0 0 0 0 0 0 0
e1/1/9 924 0 0 0 0 5 0 914
e1/1/12 0 0 0 0 0 0 0 0
v20 0 0 0 0 0 0 0 0
v60 0 0 0 0 0 0 0 0
v310 0 0 0 0 0 0 0 0
v360 0 0 0 0 0 0 0 0
History
| Release version | Command history |
|---|---|
| 08.0.20a | This command was modified to display, in the Err column, received Hello packets dropped on an interface because of an ACL to control neighbor access. |