telnet strict-management-vrf
When the management VRF is configured, incoming Telnet connection requests are allowed from the ports that belong to the management VRF and from the OOB management port.
Global configuration mode
The
telnet strict-management-vrf command is applicable only when the management VRF is configured. If a management
VRF is not configured, configuring the
telnet strict-management-vrf command displays an error message.
The
telnet strict-management-vrf command does not prevent a connection initiated from the OOB management interface
if the management interface VRF and the management VRF are the same. The user must
configure either the
management exclude all oob command or the
management exclude telnet oob
command.
For the Telnet server, changing the management VRF configuration or configuring the
telnet strict-management-vrf command does not affect the existing Telnet connections. The changes are applied
only to new incoming connection requests.
The
telnet strict-management-vrf command and the
management exclude commands are mutually exclusive. If the latter command is configured, outbound Telnet
connections are not blocked.
The
no form of the command enables the incoming Telnet connection requests from ports that
belong to the management VRF and from the out-of-band management port.
| Release version | Command history |
|---|---|
| 08.0.50 | This command was introduced. |