show ipv6 rip route
Displays the RIPng routing table.
Parameters
- ipv6-prefix/prefix-length
- Restricts the display to the entries for the specified IPv6 prefix. You must specify the ipv6-prefix parameter in hexadecimal using 16-bit values between colons as documented in RFC 2373. You must specify the prefix-length parameter as a decimal value. A slash mark (/) must follow the ipv6-prefix parameter and precede the prefix-length parameter.
Modes
Privileged EXEC mode or any configuration mode
The
show ipv6 rip route command displays the following information:
Examples
The following example shows information for a routing table with four entries.
device# show ipv6 rip route IPv6 RIP Routing Table - 4 entries: ada::1:1:1:2/128, from fe80::224:38ff:fe8f:3000, e 1/3/4 RIP, metric 2, tag 0, timers: aging 17 2001:db8::/64, from fe80::224:38ff:fe8f:3000, e 1/3/4 RIP, metric 3, tag 0, timers: aging 17 bebe::1:1:1:4/128, from ::, null (0) CONNECTED, metric 1, tag 0, timers: none cccc::1:1:1:3/128, from fe80::768e:f8ff:fe94:2da, e 2/1/23 RIP, metric 2, tag 0, timers: aging 50