micro-bfd-enable

Enables micro-Bidirectional Forwarding Detection (micro-BFD) at a global level.
Syntax
micro-bfd-enable
no micro-bfd-enable
Command Default

Micro-BFD is disabled.

Modes

Global configuration mode

Usage Guidelines

For micro-BFD to be configured at a global level, the device must be restarted after using the micro-bfd-enable command. Enabling micro- bfd causes multihop BFD support to be disabled.

This command is supported for ICX 7850 devices only.

The no form of the command disables micro-BFD sessions globally.

Examples

The following example enables micro-BFD globally. 

device# configure terminal
device(config)# micro-bfd-enable
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Commands M