mac-move-syslog-disable

Disables the generation of syslog messages when a Media Access Control (MAC) address move is detected.
Syntax
mac-move-syslog-disable
no mac-move-syslog-disable
Command Default

By default, syslog messages are generated when a MAC move is detected.

Modes

Global configuration mode

Usage Guidelines

For more information on the syslog message that is displayed when a MAC address move is detected, refer to the Syslog Messages section of the RUCKUS FastIron Monitoring Configuration Guide.

The no form of the command re-enables the generation of syslog messages when a MAC address move is detected.

Examples

The following example disables the generation of syslog messages when a MAC move is detected. 

device# configure terminal
device(config)# mac-move-syslog-disable
Disabling syslog MAC move

The following example re-enables the generation of syslog messages when a MAC move is detected. 

device# configure terminal
device(config)# no mac-move-syslog-disable
Enabling syslog MAC move
History
Release version Command history
10.0.10e This command was introduced.
Parent topic: Commands M